Storage And Transport; Removal Of Parts; Technical Specifications; Structure - lopital Reflex 5100 5600 Instructions For Use Manual

6. Storage and transport
During transport and storage, the ambient conditions must remain moderate . In other
words, the temperature should remain between -40 and +55 degrees Celsius (-40
to 130 degrees Fahrenheit) and humidity levels should be kept as low as possible .
Vibration during transport must be kept to a minimum in order to avoid damaging
the hinged mechanisms on the chair . The chair must be switched off during transport
(See paragraph 4.1. Lock button).
7. Removal of parts
All parts that are replaced or removed can be sent back to Lopital BV . You may also offer
the parts to the engineer for destruction . We will ensure that all parts are processed in
an environmentally-friendly manner .
If you take care of disposal of the product yourself, you must take account of the fact
that batteries and chargers must be disposed of as small chemical waste .
8. Technical Specifications
The Reflex Shower-toilet chair belongs to category 'BF'.
The Reflex Shower-toilet chair is a class 2 product.
The Reflex is splash-proof; this means that the Reflex can be used under the shower . This
is given with instruction IPX4 .

8.1. Structure

Frame:
Hinge points :
Wheels:
Body support :
Weight:
Maximum permitted load:
44 | Instructions for use | Reflex Shower-toilet chair
stainless steel and steel tubes and plates that are
equipped with a 2-layer powder coating
stainless steel, cover caps made of plastic V0
plastic, Ø 12 .5 cm, double blocking facility
PUR (polyurethane) .
53 kg
135 kg