Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Philips 40PFT5883/67
Summary of Contents for Philips 40PFT5883/67
-
Page 2: Table Of Contents
Change picture settings Channel issues Change sound settings Picture issues EPG Usage Sound issues Recording Menu HDMI connection issues Use Philips EasyLink Network Connection Issues Use EDID Contact us Use Timer Change the preferred TV settings 11 Open Source Quick Boot... -
Page 3: Caution
Errors 1. Remove fuse cover and fuse. reported to Philips will be adapted and 2. The replacement fuse must comply with published on the Philips support website as BS 1363 and have the ASTA approval mark. -
Page 4: Important
If you need to store the TV, disassemble the disconnect the TV from the power outlet stand from the TV. Never lay the TV on its immediately. Contact Philips Consumer back with the stand installed. Care to have the TV checked before use. - Page 5 curtains or other objects never cover the Recycling ventilation slots on the TV. Risk of injury, fire or power cord damage! Never place the TV or any objects on the Your product is designed and manufactured with power cord. ...
-
Page 6: Tv Overview
Congratulations on your purchase and use of During the Environmental Protection Use Philips product! In order to fully enjoy the Period, please use this product according to the support provided by Philips, please register your instructions given in this user manual. -
Page 7: Remote Control
switch into standby status. Enter the smart homepage. In OSD menu, press key to confirm the operation. Switch to the TV function. Press joystick key up/down/left/right In OSD menu: operation the menu. Middle In TV mode: Press joystick key up/down to switch the channel. -
Page 8: Remote Control Usage
4 Use Your TV Bottom This section helps you perform basic TV operations. (The following operations are all based on the remote control button operation. For the control panel operation, please refer to the "Control Panel" operation instructions.) Switch on/off the TV or switch it to standby Volume +/- Increase or decrease volume. -
Page 9: Watch Content On Connected Devices
channel. Watch content on connected 4. Press the (BACK) key to switch to the devices previously watched channel. Note Adjust TV volume Switch on the device before selecting it as an external source. Use the Source button Increase or decrease volume. ... -
Page 10: Use More Functions
5 Use More Functions Change Language You can change the menu language. 1. Press key to select language>menu Some functions are valid under a specific source. language; then press key. (Because the product is constantly updated, the 2. Select your needed language and then press software is upgraded at any time, if the software OK key. -
Page 11: Change Sound Settings
Picture Format: change the picture Change sound settings format. You can change sound settings to your preferred Change picture format settings by applying predefined settings or manually modifying settings. Press key to select Picture>Picture Format; then press key. Quick sound setting Picture format You can set up sound quickly by applying... -
Page 12: Epg Usage
EPG is the electronic program guide provided Use Philips EasyLink on digital channels.With EPG, you can View the list of the currently broadcast With Philips EasyLink you can operate a digital programs. connected device with the TV remote control. Watch the current transmitted program. -
Page 13: Use Edid
Use EDID Change the preferred TV settings Press key. Select TV Settings > EDID Version and 1. Press key to select TV Settings. then press OK key to enter. 2. Select one of the following and then press Select your needed version and then press OK key. -
Page 14: Software Update
6 Media Center Software Update Philips keeps improving our products.We suggest that you update TV software when a You can play pictures, videos, music and other new version is launched. multimedia files in USB devices. Check the current software version... -
Page 15: Remove Usb Storage Device
Listen to music Watch Videos Select a folder or music in the browser page and 1. Select a folder or a video in the browser then press OK key to play. Change the music page. play settings according to the instructions on the 2. -
Page 16: Set Channels
7 Set Channels Step 3 ATV Fine Tuning 1. Press key. 2. Select Channels > Analog Channel Manual Installation > Fine Tune. For the initial setup, the system will remind you 3. Select Decrease or Increase to adjust the to select network connection or TV channel frequency. -
Page 17: Network Setup
The memory space is not equal to Switch on/off Smart TV available space. Philips reserves the right to add or delete You can set the network so as to access to some apps. different networks. Do not change the ROM of TV at random. -
Page 18: Wireless Network Installation
transmitted to the TV screen. Wired Network Setting - Manual Input 1. Press key and then select Connection > Disconnection Mode Wired or Wi-Fi > Connect To Network > 1. You can disconnect the mobile device Wired Network. during transmission. 2. -
Page 19: Product Information
Supported TV mounts Compatible multimedia file formats: Image: JPEG To mount the TV, please purchase a Philips TV Audio: MP3 mount or any TV mount compliant with the Video: MPEG 2/MPEG 4, H.264, H.265 VESA standard.To prevent damage to cables and connectors, be sure to leave a clearance gap of at least 2.2 inches or 5.5cm between the back... -
Page 20: Troubleshooting
10 Troubleshooting Picture issues The TV is on, but there is no picture: This section covers common problems and their Check that the antenna is properly accompanying solutions. connected to the TV. Check that the correct device is selected as the TV source. -
Page 21: Sound Issues
Check that all cables are properly If the problem remains unresolved, please connected. contact your local Philips Customer Service Check that the volume is not set to 0. Centre. Check that the sound is not muted. -
Page 22: Open Source
BusyBox generally This is a document describing the distribution of have fewer options than their full-featured GNU the source code used on the Philips TV, which cousins; however, the options that are included fall either under the GNU General Public... - Page 23 you catch bugs in the act: a driver for new hardware, by providing a * Start your program, specifying anything that generic interface between the hardware drivers might affect its behavior. Make your program and the upper layers of the system. stop on specified conditions.
- Page 24 Source: https://www.isc.org/downloads/dhcp/ Ffmpeg (0.1) Development of media properties , the player must assembly Source: http://ffmpeg.org/ Android - kernel - common (3.4) Common Android Kernel Tree Source: https://android.googlesource.com/kernel/common/ Android (5.1.1_r1) Android Operating System Source: https://developer.android.com/index.html mali-400-kernel-drivers (master-20121127) mali-400 kernel drivers for external compilation for use with linux-sunxi kernel.