Advertisement
4. Remove the seat from the motorcycle as shown.
SEAT
5. Remove the two screws and license light cover as
shown.
LICENSE LIGHT COVER
© 2010 American Honda Motor Co., Inc - All Rights Reserved.
6. Disconnect the connectors.
BOLT
2-PIN CONNECTOR
7.
Remove the nuts as shown.
8. Remove the rear turn signal light as shown.
SCREW
08L56-MFY-1002-91
2-PIN CONNECTOR (White)
(Orange)
2-PIN CONNECTOR
(Blue)
RUBBER
2-PIN CONNECTOR
(Blue)
2-PIN CONNECTOR (White)
NUT
NUT
REAR TURN
SIGNAL LIGHT
3 of 8
Advertisement
