Download Print this page

Honda 08L56-HN8-100C Installation Instructions

Right rear fender bag
Hide thumbs

Advertisement

Quick Links

INSTALLATION
INSTRUCTIONS
Honda Dealer: Please give a copy of these instructions to your customer.
PARTS LIST
No.
Description
(1)
Right rear fender bag
USE AND CARE INFORMATION
• Check that the right rear fender bag is mounted
securely on the ATV before riding.
• Note that this accessory is not fully water resistant.
INSTALLATION
NOTE:
• Heat the bonding surfaces with a hair dryer if the
ambient air temperature is below 70°F (21°C).
• The adhesive reaches full strength in 72 hours. Wait
at least 24 hours before riding your ATV.
© 2010 American Honda Motor Co., Inc - All Rights Reserved.
Accessory
RIGHT REAR FENDER BAG
P/N 08L56-HN8-100C
(1)
Qty
1
08L56-HN8-1000-9C
Application
TRX250/420/500/650/680
1. Clean the indicated (shaded) area of the rear fender
with isopropyl alcohol.
2. Secure the right rear fender bag to the rear carrier as
shown.
REAR CARRIER
BAND
Secure to the rear carrier.
REAR CARRIER
Publications No.
MII 13201
Issue Date
Revised July 2010
ISOPROPYL ALCOHOL
Clean the installation surface
with isopropyl alcohol.
RIGHT REAR
FENDER BAG
RIGHT REAR
FENDER BAG
1 of 2

Advertisement

loading

  Summary of Contents for Honda 08L56-HN8-100C

  • Page 1 TRX250/420/500/650/680 Issue Date P/N 08L56-HN8-100C INSTRUCTIONS Revised July 2010 Honda Dealer: Please give a copy of these instructions to your customer. 1. Clean the indicated (shaded) area of the rear fender PARTS LIST with isopropyl alcohol. ISOPROPYL ALCOHOL Clean the installation surface with isopropyl alcohol.
  • Page 2 • Press on the hook and loop tape firmly and BELT adhere the right rear fender bag to the ATV securely. RIGHT REAR FENDER BAG BELT Tighten. 2 of 2 08L56-HN8-1000-9C © 2010 American Honda Motor Co., Inc - All Rights Reserved.