Computer Input; Input Source Selection (Computer 1: Rgb) - Sanyo PLC-WXU300K Owner's Manual

Computer Input

Input Source Selection (Computer 1: RGB )
Direct Operation
Choose Computer 1(RGB) by pressing the INPUT button on the top control or press the COMPUTER 1 button
on the remote control.
Before using INPUT button, correct input source should be selected through Menu operation as described
below.
Top Control
INPUT button

COMPUTER  can not be selected when using the COMPUTER IN 2/
MONITOR OUT terminal as MONITOR OUT output.
Menu Operation
Press the MENU button to display the On-Screen
1
Menu. Use the Point
then press the Point
Use the Point
▲▼

When Computer 1 is selected, press the Point
3
button to access the submenu items. Use the Point
buttons to select the RGB input source and then
▼
press the SELECT button.
 Note:
When the Input Search function is set to On1 or On in
the Auto setup function, the input signal will be searched
automatically (p.45).
Computer 1

Computer 
HDMI
Video
S-video
buttons to select Input and
▲▼
or the SELECT button.
►
buttons to select Computer 1.
Remote Control
Input Menu
►
▲
Computer
1
COMPUTER 1 button
Computer 1(RGB)
Computer 1(Scart)
7