Image Mode Selection - Sanyo PLC-WXU300K Owner's Manual

Video Input

Image Mode Selection

Direct Operation
Select the desired image mode from among Dynamic,
Standard, Cinema, Blackboard (Green), Colorboard,
Image 1, Image , Image 3 and Image 4 by pressing the
IMAGE button on the remote control.
Menu Operation
1 Press the MENU button to display the On-Screen
Menu. Use the Point
select and then press the Point
button.
 Use the Point
▲▼
and then press the SELECT button .
Dynamic
For viewing pictures in a bright room.
Standard
Normal picture mode preset on the projector.
Cinema
Picture mode adjusted with fine tone.
Blackboard (Green)
For the image projected on a blackboard.
This mode help enhance the image projected on a
blackboard. This is mainly effective on a green colored
board, not truly effective on a black colored board.
Colorboard
At the time of simple projection on the colored wall, you
can get the close color image to the color image projected
on a white screen by selecting the similar color to the wall
color from the preset four colors.
Image 1–4
For viewing with the user preset image mode in the Image
adjust Menu (see pages 41- 42). This Image memory is
provided in each computer, component, S-video and video
input source.
40
buttons to select Image
▲▼
or the SELECT
►
buttons to select the desired item
Remote Control
IMAGE button
Image select Menu
IMAGE button
Dynamic
Standard
Cinema
Blackboard (Green)
Colorboard
Image 1
Image 
Image 3
Image 4