Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Anttron TM250HD
Summary of Contents for Anttron TM250HD
- Page 1 TM250HD HD encoder DVB-T/DVB-C/IP out USER MANUAL V1.0...
-
Page 2: Table Of Contents
DVB-T, DVB-C modulator or as IP streamer. Stand-alone configuration is made easy through 4 tact switches and ergonomic menu’s. To make the configuration of the TM250HD ultra simple, a special software TMHDIface is available that you can download on our website anttron.com... -
Page 3: Safety Considerations
TM250HD USER MANUAL 1 - Safety considerations 1.1 CONNECTING TO THE MAINS SUPPLY This product has to be connected to the mains supply. If there is the slightest doubt concerning the type of connection available on the installation, please contact your supplier of electricity. Before car- rying out maintenance operation or modification of the installation, the modulator has to be discon- nected. -
Page 4: Description Of The Different Elements
TM250HD USER MANUAL 2 - Description of the different elements Power supply input (5V/4A) USB input (for programming the TM250HD by PC) Ethernet connection RJ45 RF input RF output DC input INPUT OUTPUT COMPONENT VIDEO INPUT AUDIO INPUT HDMI input... -
Page 5: Installation And Menu Structure
3 - Installation and menu structure 3.1 - Installation Install the TM250HD against a wall using the wall fixation brackets to ensure cooling of the housing through natural convection. ( see drawing) Connect the audio and video source using HDMI, PC, or component VIDEO and ANALOG audio cables. -
Page 6: Menu Structure
TM250HD USER MANUAL 3.3 - Menu structure The TM250HD has different menus allowing easy access to the differents parameters and to change them when necessary. Below you will find the structure of the different menus. CONFIGURATION MAIN MENU IP-STREAMER CONFIGURATION... -
Page 7: Setting Up The Tm250Hd
DVB-C MODULATOR 4.2 - The DVB settings menu If the TM250HD is configured as DVBT modulator or DVBC modulator, you can set in this menu the output frequency, bandwidth, output level and specific parameters for DVB-T or DVB-C. DVB SETTINGS... -
Page 8: Setting Dvb-T Parameters
TM250HD USER MANUAL 4.2.1 - Setting DVB-T parameters FREQUENCY BANDWIDTH ATTENUATION DVB-T When you select DVB-T and press the ENTER button, the following submenu appears. It allows you to set the DVB-T parameters. MODE Select the mode CONSTELLATION F.E.C. GUARD INTERVAL... -
Page 9: The Ip Settings Menu
TM250HD USER MANUAL 4.3 - The IP settings menu IP SETTINGS When your TM250HD is configured as IP streamer, the you can adjust the settings in the IP settings menu. PROTOCOL IP ADDRESS UDP PORT PROTOCOL Select UDP or RTP... -
Page 10: Changing The Audio Settings
TM250HD USER MANUAL 4.4.2 - Changing the AUDIO settings Select the audio input AUDIO INPUT HDMI VIDEO SETTINGS AUDIO RATE ANALOG AUDIO AUDIO SETTINGS HDMI-PCM VOLUME Select the audio bitrate 192 Kb/s AUDIO INPUT 256 Kb/s AUDIO RATE 320 Kb/s... -
Page 11: The Language Menu
TM250HD USER MANUAL NET ID. TS ID. ORIG. NET. ID. 100_ Set the Transport Stream ID. NETWORK NAME 8 Xfbc0123456789 TS ID. ORIG. NET. ID. PROGRAM ID NETWORK NAME Set the PROGRAM ID. TS ID. 8 Xfbc0123456789 PROGRAM ID. NETWORK NAME TS ID. -
Page 12: Programming Using A Pc
First, please install the software TMHDIFace on your PC. You can download this software from our internet site anttron.com After installation of this software, connect the TM250HD using a USB cable (not included) to your per- sonal computer. Then launch the program TMHDIface.
Need help?
Do you have a question about the TM250HD and is the answer not in the manual?
Questions and answers