Maintenance And Care; Maintaining The Amc Unit - Sanyo PLC HF15000L Owner's Manual

Maintaining the AMC unit

1
Press the ON/STAND-BY button on the side control
or the STAND-BY button on the remote control, flip
the Main On/Off Switch off, and then unplug the AC
power cord from the AC outlet.
2
Remove the dust on the projector and air vents.
3
Loosen the 2 screws that secure the AMC unit and
pull it out.
4
Overturn the AMC unit and loosen the 2 screws that
secure the filter cleaning unit.
5
After opening the filter cleaning unit cover, take out
the dust bin from the filter cleaning unit, empty the
dust bin by discarding the dust into a trash bin or
carefully sucking up the dust with a vacuum cleaner,
clean the brush, place back the dust bin, and then
close the cover.
6
Place the AMC unit back into the projector and fix it
with the 2 screws.
7
Plug the power cord and power on the projector.
✔
Note:
• Do not reset the filter counter if the filters were not replaced.
RECOMMENDATION
We recommend avoiding dusty/smoky environments when
operating the projector. Usage in these environments may
cause a poor image quality.
When using the projector under dusty or smoky conditions,
dust may accumulate on a lens, liquid crystal panels, or optical
elements inside the projector. Such condition may degrade the
quality of the projected image.
When the symptoms above are noticed, contact your authorized
dealer or service center for proper cleaning.
7

Maintenance and Care

3
AMC unit
Screws
AMC unit
4
5
Filter cleaning
unit cover
Dust bin
Filter cleaning unit
Screws
Brush
Mesh filter
Close the dust tray
slowly and dispose
the dust.
When you suck
up the dust with
a vacuum cleaner,
use a crevice tool.