Indicators; Lamp 1/2/3/4 Replace Indicators - Sanyo PLC HF15000L Owner's Manual

Indicators

q
w
e
r
t
y

LAMP 1/2/3/4 REPLACE indicators

Part Names and Functions
q POWER indicator
This indicator lights green when the projector
is ready to be turned on in standby mode. And
it flashes green in Power Management mode.
(pp.63, 86-88)
w LAMP Indicator
This indicator is dim when the projector is turned
on. And bright when the projector is in stand-by
mode. (pp.86-88)
e WARNING TEMP . indicator
This indicator flashes red when internal projector
temperature is too high. (pp.79, 86-88)
r WARNING FILTER indicator
– Lights orange when the clogging of the filter
is detected or the filter counter reaches a time
set in the timer setting, urging immediate filter
replacement. (pp.68, 73, 88)
– Blinks orange during a filter cleaning process.
t SHUTTER indicator
Lights blue when the shutter is closed. (p. 86)
y LAMP REPLACE indicator
Lights orange when any of the projection lamps
reaches its end of life. (pp.76, 87)
- When any of the LAMP 1/2/3/4 REPLACE indicators lights:
The corresponding lamp is approaching its end.
- When any of the LAMP 1/2/3/4 REPLACE indicators flashes:
The corresponding lamp needs to be replaced.
1