Maintenance And Care; Filter Instructions - Sanyo PLC-XM80 Owner's Manual

Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter becomes clogged with
dust particles, it will reduce cooling fans' effectiveness and may result in internal heat buildup and adversely affect the life of
the projector.
If the projector reaches a time set in the timer setting (p.62), a Filter
warning icon (Fig.1) appears on the screen and the WARNING
FILTER indicator on the top panel lights up (p.78). When you see
this icon, replace the filter cartridge as soon as possible (pp.30,
56). All the indicators except Lamp indicator blink fast when the
projector detects an abnormal condition, or the filter cartridge is not
installed properly (p.78).
P
Note:
• Fig.1 will not appear when the Display function is set to Off
(p.52), or during "Freeze" (p.30) or "No show" (p 29).
• The filter cartridge is disposable. Do not clean and reuse the
filter cartridge.
• Do not expose the filter cartridge to water or liquid, or it may
cause a breakdown.
• Do not use the filter cartridge with other projector.
• Make sure that the projection lamp is turn off when you are
replacing the filter cartridge. If you replace the filter cartridge
when the projection lamp is turn on, the projector will be shut
down automatically for safety purpose.

Maintenance and Care

Filter Instructions

Fig .1 Filter warning icon
Filter warning icon appears on the screen at a
set time.
6