Image Adjustment - Sanyo PLC HF15000L Owner's Manual

1
Press the MENU button to display the On-Screen
Menu. Use the Point ed buttons to select Image
adjust and then press the Point 8 or the SELECT
button.

Use the Point ed buttons to select the desired item
and then press the SELECT button to display the
adjustment dialog box. Use the Point
adjust the setting value.
Contrast
Press the Point button to decrease the contrast; press the
7
Point button to increase the contrast (from 0 to 63).
8
Brightness
Press the Point button to decrease the brightness; press
7
the Point 8 button to increase the brightness (from 0 to 63).
Color management
The Color Management function can be used to adjust the LEVEL,
PHASE, and GAMMA of the selected display colors (except for
black, white, and gray) on the screen and replace these colors with
other colors if required.
You can store up to eight (8) color management data.
1
Select and highlight Color Management by using the Point
ed buttons and press the SELECT button. The projected
image freezes, and the COLOR MANAGEMENT POINTER
appears.
2
Use the Point ed7 8 buttons to move the pointer to the
spot where you want to adjust the color and then press the
SELECT button. The COLOR SELECTION window appears,
and the color in the center of the pointer is selected and you
can adjust the color.
3
Use the Point ed7 8 buttons to adjust the LEVEL and
PHASE of the color, and then press the SELECT button to
confirm the setting. Then use the Point ed buttons to adjust
the GAMMA for the color and press the SELECT button to
accept the setting. After adjusting, press the SELECT button
to go to the COLOR MANAGEMENT LIST.
COLOR SELECTION MODE
LIST
Go to the COLOR MANAGEMENT LIST.
COLOR M.
Return to the COLOR MANAGEMENT POINTER. (If you press
the MENU button on the side control or the remote control ,
it returns to the COLOR MANAGEMENT POINTER and you
will need to reselect and readjust the color.)

Image Adjustment

Image Adjust Menu
8 buttons to
7
Note
✔
When White balance Red, Green or Blue is adjusted,
Color temp. will change to Adj.
Selected Image mode
Use the Point
to adjust the setting value.
POINTER MODE
Computer Input
buttons
7 8
COLOR MANAGEMENT
POINTER
41