Enclosure Fan Assemblies Replacement - Philips Vari-Lite VL440 Service Manual

Enclosure Fan Assemblies Replacement

WARNING: Ensure that power is completely removed (disconnected) from luminaire before
attempting any work.
To remove one or both enclosure fan assemblies:
Step 1. Ensure power is completely removed from luminaire and luminaire has cooled completely.
Step 2. Remove Ballast / LVS assembly as described in
page
WARNING: Do not set head on or damage front lens during next step!
Step 3. Carefully, flip luminaire to access bottom of enclosure. Do not set on lens.
Step 4. Remove six 1/4-20 x 1/2" PFZ screws and remove Bottom Plate from enclosure assembly.
NOTE:
Components removed and
exploded for clarity.
02.96 87.001 0 0
M P
AINTENANCE ROCEDURES
60.
Enclosure Assembly
Bottom Plate
1/4-20 x 1/2" PFZ Screw (x6)
Figure 2-61: Enclosure Assembly Bottom Plate Removal
: E F A
NCLOSURE AN SSEMBLIES
"Ballast / LVS Assembly Replacement" on
2
R
EPLACEMENT
75