Philips Vari-Lite VL440 Service Manual page 61

Step 7. Loosen two quarter-turn Dzus rapier fasteners from lamp house cover and remove lamp.
Step 8. Remove one 6-32 x 3/8" PPZ SEMS screw and flat washer and detach lamp cover tether
from fixture.
Step 9. As shown in
a. Remove two 8-32 x 5/8" PPZ SEMS screw (1 per side) at counter weight plate, closest
b. Note, the counter weight plates will stay attached by 2 screws closest to inside of fixture.
Step 10. Remove two 6-32 x 3/8" PPZ SEMS screws from rear of assembly, closest to L1 & L2 fans.
02.96 87.001 0 0
M
Figure 2-27: Lamp Socket Cover Removal
Figure 2-28 on page
to rear of assembly.
P
AINTENANCE ROCEDURES
44, at each side:
: L S R
AMP OCKET EMOVAL
Lamp Socket
Lamp
Lamp Socket
Cover
Quarter-Turn
Fasteners
2
43