Specifications - Sanyo SRT-2400DC Instruction Manual

NU4QG/NA3 (SRT-2400DC GB) Mon. Sept., 17/2001

SPECIFICATIONS

General Specifications
Video heads system
Audio recording
Tape speed
Specified video cassette tape
Recording/playback time
Fast forward/rewind time
Television system
RS-485 data transfer speed
Video
Recording method
Video input
Video output
Horizontal resolution
Audio
Input
Output
Microphone input
Connectors
Alarm input/Clock input
Alarm output/Clock output
Series input
Series output/Non rec output
Switch output
Eject input
Eject output
Warning output
Tape end output
Common
Remote control input
With the optional RS-485 board
RS485 A
RS485 B
Other Specifications
Operating temperature range
Operating humidity range
Power requirements
Power consumption
Dimensions
Weight
NOTE:
The specifications and external appearance of this unit are subject to change without notice.
English
Dual-azimuth 4-head rotating helical scanning system:
Dual azimuth 2-head for record and standard playback
Dual azimuth 4-head for forward picture search, reverse picture search
and still mode
In 8-, 24- and 40-hour modes (when using T-160 tape)
In 6-, 18- and 30-hour modes (when using T-120 tape)
11.12 mm /sec
VHS 1/2 inch video cassette tape
8, 24 and 40 hours (when using T-160 tape)
6, 18 and 30 hours (when using T-120 tape)
approximately 3 minutes 30 seconds (when using T-160 tape)
NTSC color TV system
19200, 9600, 4800, 2400 baud
Luminance signal: FM recording
Chrominance signal: Down-converted direct recording
1 V(p-p), BNC, 75 , unbalanced
1 V(p-p), BNC, 75 , unbalanced
Black & white mode 350 line or more
Color mode 300 line or more
– 8 dBs, RCA pin jack, 27 k , unbalanced
– 8 dBs, RCA pin jack, 600 , unbalanced
– 60 dBs, 3.5 mm mini jack, 10 k , unbalanced
Low level active (0V 100msec or more)
DC 5 V ( 0.5)/5.7 k , Low at alarm or clock set in
Low level active (0V 1sec or more)
DC 5 V ( 0.5)/5.7 k
DC 5 V ( 0.5)/5.7 k , Low at switching
Low level active (0V 100msec or more)
DC 5 V ( 0.5)/5.7 k , Low at eject in
DC 5 V ( 0.5)/5.7 k , Low at warning
DC 5 V ( 0.5)/5.7 k , Low at tape end
0 V (GND)
3.5 mm mini jack
Non-inverting driver output/receiver input
Inverting driver output/receiver input
5° C to 40° C
80% or less
DC 12 V (10 V to 16 V)
18 W
240 (W) x 96.5 (H) x 335 (D) mm
approximately 3.8 kg
47