Print Configuration; Self-Test Printout - LabelTac Pro X User Manual

Diagnostics

Print Configuration

This feature is used to print current printer configuration to the la-
bel. On the configuration printout, there is a print head test pattern,
which is useful for checking if there is any dot damage on the print
head heater element.

Self-test printout

Menu
Menu Diagnostics
LabelTac
®
Diagnostics
Pro X | REFERENCE GUIDE
Print Config.
Dump Mode
Print Head
Display
Sensor
Print Config.
Model name
F/W version
Firmware checksum
Printer S/N
Configuration file
System date
System time
Printed mileage (meter)
Cutting counter
Print speed (inch/sec)
Print darkness
Label size (inch)
Gap diestance (inch)
Gap/black mark sensor
intention
Code page
Country code