Toyota Camry 2012 Emergency Response Manual page 23

Emergency Response (Continued)
Extrication (Continued)

Stabilize Vehicle
Crib at (4) points directly under the front and rear pillars.
Do not place cribbing under the high voltage power cables, exhaust
system, or fuel system.
NOTE:
The Camry hybrid is equipped with a tire pressure warning system
that by design prevents pulling the metal valve stem with integral
transmitter from the wheel. Snapping the valve stem with pliers or
removing the valve cap and Schrader valve will release the air in the
tire.

Access Patients
Glass Removal
Use normal glass removal procedures as required.
SRS Awareness
Responders need to be cautious when working in close proximity
to undeployed airbags and seat belt pretensioners. Front dual
stage airbags automatically ignite both stages within a fraction of
a second.
Door Removal/Displacement
Doors can be removed by conventional rescue tools such as hand,
electric, and hydraulic tools. In certain situations, it may be
easier to pry back the vehicle body to expose and unbolt the
hinges.
NOTE:
To prevent accidental airbag deployment when performing front
door removal/displacement, ensure the vehicle is shut off and the
12 Volt auxiliary battery is disconnected.
Cribbing Points
Cribbing Points
20
- -
Tire Pressure Sensor Metal Valve Stem
with Integral Transmitter.
Metal Valve Stem with Integral
Transmitter Installed on Wheel