Disarming The System - Scantronic 9600 User Manual

5
Note 1
if display shows
INVALID CODE YES/
NO press the 'Yes' or
'No' key and re-enter
your access code.
Note 2 (TWO-PLY ENTER TIMER)
On entering the premises the keypad sounder will emit an interrupted tone for the
duration of the programmed entry time. If the user exceeds the programmed entry time, the
internal sounder will emit a rapid warning tone for a preset time of 30 seconds. This two stage timer
is known as 'Two-Ply'. If the user exceeds the second stage timer, an alarm condition will be
initiated.
Note 3 (System Programmed Abort)
Should the user accidentally deviate from the prescribed entry route during the First Ply entry
time, the system will automatically change from the 'Entry' mode to the 'Abort' mode (if
programmed by the installer). The entry timer will change to a second ply fixed timer of 90
seconds along with a rapid warning tone. The user must enter a valid user code during the 90
seconds otherwise an alarm will be initiated. If the user exceeds the entry timer and deviates
from the entry route during the second ply timer, a further 60 seconds will be available for the
user to enter a valid user code before an alarm is initiated.
Note 4 (System Programmed Non Abort)
Should the user accidentally deviate from the prescribed entry route during either of the First or
Second Ply timers, an alarm condition will be initiated.
6
D T S
ISARMING HE YSTEM
Enter the premises
via the prescribed
entry route
Entry tone starts
(interrupted tone)
1st Ply timer - See Notes
Key-in your Access
Code at the nearest
keypad
ENTER CODE
****
SYSTEM UNSET
00:01 MON 01 JAN