Fire Alarm - Scantronic 9600 User Manual

Note 1
If the system has smoke or
heat detectors fitted to a
zone which has been
programmed as Fire and a
fire is detected, the
following events will
occur.
Note 2
If the system has remote
signalling fitted, a fire
code will be transmitted to
the alarm company central
station. The necessary
information may be passed
to the nearest fire station.
In any event, always dial
999 and call the fire
brigade.

FIRE ALARM

Internal sounder generating a
quick two tone warning, the
external bell is pulsing and the
external strobe is on.
Display will show FIRE
zone has been activated
e.g., KITCHEN
FIRE
KITCHEN
Evacuate all
occupants of the
building and call
the fire brigade.
If safe to do so. enter
valid code to silence
alarm
RESET REQUIRED
KITCHEN
Alternates between
ALARM
KITCHEN
To reset system Key-
in a valid Access
Code
ENTER CODE
****
SYSTEM NOW RESET
00:01 MON 01 JAN
10
11