2 INTRODUCTION
2.2 Factory Terminated Cables
Factory terminated cables can be connected as received to
junction boxes and other equipment. The standard factory
termination utilizes the epoxy sealing compound shown in
Figure 22 on page 30. The cables are supplied with a metal
identification tag showing the cable specifications and
approvals.
2.3 Field Terminated Cables
Cables that are to be terminated in the field are supplied
with temporary heat shrinkable end caps that seal the
ends against moisture ingress. Field installed termination
kits are available with the epoxy sealing compound or
gray sealing compound shown in Section 5.5, page 30
and 31, and should be selected based on the application.
Identification tags are not supplied.
4 | nVent.com