Table of Contents
Advertisement
1 GENERAL INFORMATION
1.1 Use of the Manual
This manual covers storage and installation of
PYROTENAX Alloy 825 Sheath MI industrial wiring cables.
It is assumed that the cables have been correctly sized
and the installation properly designed. Installers must be
trained and familiar with relevant codes and standards
and generally accepted good practice for handling and
installing power cables. For installations or situations that
are not covered in this guide, please contact nVent for
guidance.
For additional information, contact:
nVent
7433 Harwin Drive
Houston, TX 77036
USA
Tel +1.800.545.6258
Fax +1.800.527.5703
thermal.info@nvent.com
nVent.com
1.2 Safety Guidelines
The safety and reliability of an MI cable system depend on
the proper design and installation of the system and use of
proper materials for support, as well as the quality of the
cable selected. Incorrect design or installation or use of
inappropriate support materials can result in a system that
may not perform satisfactorily, and in the case of a fire-
rated system, it may not perform under fire conditions.
Install all wiring in accordance with the latest edition
of national electrical codes and standards, such as the
National Electrical Code (NEC) or Canadian Electrical Code
(CEC), and/or the Authority Having Jurisdiction and the
instructions in this manual.
•
Notes are marked
•
Important instructions are marked
•
Warnings are marked
Note
WARNING
Important
nVent.com | 1
Advertisement
Table of Contents
