Advertisement
|
CONTOUR SE AT SYS TEM
Seat Pan Adjustment
The Delta Contour II seat pan is designed to slide forward and back into 5 different positions.
This feature adjusts the distance to the foot braces, adjust the position of your thighs under
the thigh braces for maximum control, and adjust the trim of your kayak in cases where
you have distributed the weight of your load unevenly. By adjusting the seat pan to its
furthest rear position, entering and exiting your cockpit is made easier.
Backrest Adjustment
For back support, the backrest incline can be adjusted with the seat cord located on the
right side of the cockpit coaming. This cord runs through the backrest and adjusts with
a cleat. To adjust the backrest incline, release the cord from the cleat by pulling the cord
inward towards the centre of the cockpit. When a comfortable incline position is found,
lock the adjustment cord back into the cleat. To adjust the backrest height, simply pull
up or push down on the backrest and it will slide into the next position on the seat post.
You can also pull up or down on the tube located on the backside of the backrest and
move it up or down on the ladder. Once pressure is applied on the backrest, this tube
will seat itself into one of the positions on the seat post and secure in that position.
The adjustment of your backrest incline and height can be done while on shore or seated
in the cockpit while on the water.
E X P E R I E N C E T H E D E L T A D I F F E R E N C E
|
D E L T A K A Y A K S . C O M
TOP VIEW
1
BACK VIEW
1
1
13
Advertisement
