Overlays - Axis Q6054 Mk III User Manual

AXIS Q6054 Mk III PTZ Network Camera
Setup
Image with WDR.
Note
WDR may cause artifacts in the image.
Find out more about WDR and how to use it at axis.com/web-articles/wdr
How to stabilize a shaky image with Electronic Image Stabilization (EIS)
EIS can be used in environments where the product is mounted in an exposed location and subject to vibrations, for example, wind
or passing traffic. Turn on EIS to get a smoother and steadier image without blur.
EIS also reduces the file size of the compressed image and lowers the bitrate of the video stream.
Note
When EIS is turned on the image is cropped slightly, lowering the maximum resolution.
1. Go to Settings > Image.
2. Turn on EIS.

Overlays

About overlays
Overlays are superimposed over the video stream. They are used to provide extra information during recordings, such as a timestamp,
or during product installation and configuration.
How to show a text overlay when the camera detects motion
This example explains how to display the text "Motion detected" when the camera detects motion:
Make sure the AXIS Video Motion Detection application is running:
1. Go to Settings > Apps > AXIS Video Motion Detection.
2. Start the application if it is not already running.
3. Make sure you have set up the application according to your needs.
Add the overlay text:
4. Go to Settings > Overlay.
5. Select Create overlay and confirm Text overlay.
6. Enter #D in the text field.
10