Miele DG 6030 User Manual page 76

Problem
The heating-up phase
lasts an unusually long
time.
 
 

Cause and remedy
The water container has a lot of limescale built-up in it
because the appliance was not set correctly for the
hardness of the local water supply.
 Set the correct water hardness level for your water
supply (see "Settings).
 Proceed as described in "Cleaning and care -
Descaling".
 If the water hardness level was in fact set correctly
or the problem occurs again, contact the Service
Department.
Technical fault.
 Switch the appliance off and contact Miele.
The water container has not been pushed into the
appliance properly.
 Remove the water container and push it back in so
that it connects.
 Switch the steam oven off and then back on again.
The water container has become harder to put into
the appliance and take out again.
 Lightly lubricate the coupling seal on the water
container with silicone grease, as described in
"Cleaning and care - Water container".
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
What to do if ...
75