Advertisement
F. HOW TO CHANGE THE DEFAULT
SETTING/IMPERIAL TO METRIC
Vice Versa(METRIC TO IMPERIAL)
The default measuring units can be
changed by following the steps below.
The unit should be turned off before
commencing.
1. Press and hold the SEL/AVG key,
then press the ON/OFF key once to
turn the unit on. When the LCD
displays " ft/m,ms " and " C, F"
release the SEL/AVG key.(Fig.7)
2. To choose metric units press the
HOLD key. The LCD should display "
o
m/s, C". (See Fig.8)
To choose the imperial units press the
SEL/AVG key. The LCD should display
o
"ft/m, F" (See Fig.9).
Fig.7
Fig.8
Fig.9
9
o
o
ft/m
m/s
m/s
ft/m
Advertisement
