Option 2: Connect Analog Cable, Vcr, And An Antenna; Helpful Hints For Video1 Connections - Sanyo DP37647 Owner's Manual

VIDEO1 COMPOSITE (ANALOG) JACKS: Connection Option 2
CONNECTING ANALOG CABLE, VCR, AND AN ANTENNA TO THE DTV
1 Connect Analog Cable system to the VCR
"Antenna In."
2 Connect the VCR AV out jacks to VIDEO1 Yellow,
White, and Red jacks.
Connect an Antenna to the DTV ANT terminal.
3
IMPORTANT FACT:
Composite jacks offer only 480i (SDTV ) resolution.
CABLE SYSTEM
(Service provider)
…
INPUT
REMOTE CONTROL
SYMPTOM
"No Signal" will appear randomly
on the screen when no signal is
detected at the video jack.
VCR
‚
ANTENNA
OPERATING TIP:
Refer to the owner's manuals and user's guides that came with your external
equipment for connection options.
HELP HINTS (PROBLEMS/SOLUTIONS)
CHECK THESE CONDITIONS
Check Audio/ Video connections.
G
Check external equipment
G
connections.
Check external equipment setting.
G
If you continue to experience problems, please call toll free
4 Press INPUT to select Video 1 to watch Analog
Cable channels OR to TV channels to watch
Antenna channels.
5 Select channels with the VCR's remote control.
Select Antenna channels with the DTV remote
control.
YELLOW,
WHITE, & RED,
JACKS
ƒ
1-800-877-5032.
DTV VIDEO1
„
DTV ANALOG/DIGITAL
ANTENNA IN (ANT)
TRY THESE SOLUTIONS
Press the INPUT key.
G
Switch on external equipment.
G
Set external equipment output
G
connections to match input
connections.
We can Help!
22