Option 1: Connect Analog Cable, Cable Box, Vcr, And An Antenna; Helpful Hints For Video1 Connections - Sanyo DP37647 Owner's Manual

VIDEO1 COMPOSITE (ANALOG) JACKS: Connection Option 1
CONNECTING ANALOG CABLE, CABLE BOX, VCR, AND AN ANTENNA TO
THE DTV
1 Connect Analog Cable Box "Antenna Out" to the
VCR "Antenna In."
Connect the VCR AV out jacks to VIDEO1 Yellow,
2
White, and Red jacks.
OPTIONAL FOR A SUPER VHS VCR
3 3
Connect VCR to the DTV S-Video In Jack. Dsicon-
nect the VIDEO1 yellow jack.
Note: S-Video jack connection overrides a Video jack connection
(VIDEO1).
Connect an Antenna to the DTV ANT terminal.
4
IMPORTANT FACTS:
Composite jacks offer
only 480i (SDTV)
resolution.
‡
INPUT
REMOTE CONTROL
SYMPTOM
"No Signal" will appear randomly
on the screen when no signal is
detected at the video jack.
CABLE SYSTEM
(Service provider)
CABLE BOX
‚
VCR
VCR
OPERATING TIP:
Refer to the owner's manuals and user's
guides that came with your external
equipment for connection options.
HELP HINTS (PROBLEMS/SOLUTIONS)
CHECK THESE CONDITIONS
Check Audio / Video connections.
G
Check external equipment
G
connections.
Check external equipment setting.
G
If you continue to experience problems, please call toll free
1-800-877-5032.
Tune VCR to channel 3 or 4 to match your Cable
5
Box.
Press INPUT to select Video 1 to watch Analog
6
Cable channels OR to TV channels to watch
Antenna channels.
Select Cable channels with the cable box remote
7
control. Select Antenna channels with the DTV
remote control.
S-VIDEO JACK
(Optional)
ƒ
z
YELLOW,
WHITE, & RED
JACKS
ANTENNA
We can Help!
DTV VIDEO1
…
DTV ANALOG/DIGITAL
ANTENNA IN (ANT)
TRY THESE SOLUTIONS
Press the INPUT key.
G
Switch on external equipment.
G
Set external equipment output
G
connections to match input
connections.
21