Analog A/V Connections; Using The Analog Video Jacks To Connect A Vcr; (Or Other Analog Device); Connecting Analog Audio Out Jacks To A - Sanyo HT27745 Owner's Manual

USING THE ANALOG VIDEO JACKS
TO CONNECT A VCR (OR OTHER
ANALOG DEVICE)
Switch off DTV and external equipment before connect-
ing cables. (Cables are not supplied.)
1
Connect VCR's Audio Video Out to the DTV's Video
In jacks.
NOTE: For Mono VCR (Single Audio Jack), connect
VCR Audio Out to DTV Audio (L) Input.
2 2
Optional
Connect VCR's S-Video Out to the DTV's S-Video In
Jack.
NOTE: S-Video jacks connection override Video
jacks connection.
3
Press POWER to turn on the DTV, then turn on
external equipment.
4
Press the INPUT to select VIDEO 1 or VIDEO 2 to
view the VCR program.
Back View of VCR
IN
OUT
1
DTV AV
INPUT Jacks
Remote Control
INPUT
POWER
1 2 3
4
4 5 6
10
Need help?
Visit our Web site at

ANALOG A/V CONNECTIONS

IN
FROM ANT.
VHF/UHF
R-AUDIO-L VIDEO
RF
TO TV
CHANNEL
3 4
OUT
R-AUDIO-L VIDEO S-VIDEO OUT
S-Video
Jack
COMPONENT VIDEO INPUT VIDEO AUDIO INPUT
VIDEO 2 VIDEO 1
S-VIDEO
ANALOG
COMPO 3 COMPO 2 AUDIO 3
AUDIO
OUTPUT
Y
P
b
L L
(MONO)
P
r
R R
NOTE: Composite jacks
offer only 480i (SDTV)
resolution.
3
What you will need
for connections:
Audio / Video Cable – 1
S-Video Cable – 1
www.sanyoctv.com
CONNECTING ANALOG AUDIO OUT
JACKS TO A STEREO AMPLIFIER
Switch off DTV and external equipment before connect-
ing cables. (Cables are not supplied.)
1
Connect the DTV Audio Out (R/L) to the Stereo
Amplifier In (R/L).
2
Press POWER to turn on the DTV, then turn on
external equipment.
NOTES:
Do not connect external speakers directly to the DTV.
When TV Speaker is in the ON mode, sound will be
reproduced through your DTV and stereo amplifier.
When TV Speaker is in the OFF mode, sound will be
reproduced only through the stereo amplifier. (See page
20 to set DTV speakers.)
What you will need for
connections:
Audio Cable – 1
2 2
VIDEO
AUDIO (MONO) L
I
Press INPUT key after connecting cables to access the VIDEO 1 or
VIDEO 2 input. There is NO need to tune to a blank channel.
I
VIDEO 1 and VIDEO 2 jacks have identical functions. Any com-
patible analog video device can be connected to either set of jacks.
I
"No Signal" will appear randomly on the screen when no signal is
detected at the VIDEO 1 or VIDEO 2 inputs.
I
Position your DTV at least 2 feet from stereo speakers. The
magnets in the speakers may affect the picture quality.
1-800-877-5032
or Call
1
Remote Control

Stereo Amplifier

COMPONENT VIDEO
ANALOG
COMPO 3
AUDIO
OUTPUT
Y
P
b
L (MONO)
P
R r
Back View of DTV
INPUT
POWER
1 2 3
2
4 5 6