Menu Operation; Preset Menu; Fine Tuning - Sanyo CE28DFN2-B Instruction Manual

Preset menu

The preset menu can be used to tune new channels, to reorder
channels and their programme positions, and to make fine adjust-
ments to the tuning.
There are two ways to tune in new channels.
Auto : Searches for all channels and stores them automatically.
Semi : Manual search to add channels.
Tuning - Auto
1. Press the MENU button to select main menu.
2. Using e or d, select Preset, press 8 and select Tuning using e or
d buttons.
Picture
Sound
Tuning
Timer
Setting
Swap
Preset

Fine Tuning

3. Press 8 to select Auto and d to select Channel (CH:34) as
shown.
AUTO
CH: 34
P: 02
Skip:OFF
memory?
Press the 7 or 8 all available channels are stored.
To cancel this tuning operation, press the MENU button repeatedly.
After completing this procedure, the TV set returns to normal TV
mode and selects programme position "01".
You can change the order of the station selection, by using the
channel swapping function detailed later.
You do not need to use Memory function at this stage as all channels
are automatically saved.
Tuning - Semi
1. Press the MENU button to select main menu.
2. Using e or d, select Preset, press 8 and select Tuning using e or
d buttons.
Picture
Sound
Timer
Setting
Preset
3. Press 8 to select Semi and d to select Programme position
(P:04) as shown where you want to store a channel.(eg. CH4)
SEMI
CH: 34
P: 04
Skip:OFF
memory?
4. Select the channel search ( CH:34) and start searching by pressing
the 7 or 8 buttons.
SEMI
CH: 34
P: 02
Skip:OFF
memory?
5. When a channel is located searching stops, If you do not want this
channel press 7 or 8 to search again.
You can enter a channel number directly with the 0-9 numeric
buttons if you know the number.
14
MENU OPERA
MENU OPERA
Auto
or
Semi
CH:22
AUTO
CH:21
CH: 34
P: 02
Skip:OFF
CH:21
memory?
CH:22
Tuning
SEMI
Swap
CH: 34
P: 02
Fine Tuning
Skip:OFF
memory?
P:06
P:05
P:03
P:02
CH:36
CH:35
CH:34
CH:33
TION - Anologue channels
TION - Anologue channels
Skip
Skip ON : in normal operation when the e or d button is pressed
this position will be skipped.
Skip OFF : Position is not skipped when e or d button is pressed.
To select Skip Press d and press 7 or 8 to set to ON or OFF.
You can still view a programme position that has been skipped by
using the numeric buttons to select the programme position directly.
6. Select memory by pressing the d. Press 8 a tick indicates the chan-
nel is now stored.
Press MENU button repeatedly to exit and return to normal TV
picture.
Swap
Use this channel swapping feature to swap the channels between
two stored programme positions. This feature is particularly useful
after automatic tuning.
You have to choose a programme that you wish to swap on the TV
set. eg. Swap programme position 4 and 12.
1. Select programme position 4.
2. Press the MENU button.
3. Select Preset by pressing e or d buttons. Follow the diagram
below.
Picture
Sound
Timer
Setting
Preset
4. Enter the programme number (12), press 8 and the channels are
swapped.
Fine tuning
Auto
or
1. Press the MENU button.
Semi
2. Select Preset by pressing e or d buttons. Follow the diagram
below. Press 8 to enter.
Picture
Sound
Timer
Setting
Preset
3. Press e or d to select Fine Tuning, press 8 to fine tune
channels.
The tuning will be stored when you exit the menu.
SEMI ON
CH: 34
P: 04
OFF
Skip:OFF
memory?
SEMI
CH: 34
P: 04
Skip:OFF
memory
memory?
Tuning
Swap
Fine Tuning
Tuning
Swap
Fine Tuning
Tuning
Swap 12
Swap
Fine Tuning