Menu Operation - Sanyo CM29FS2 Instruction Manual

Menu Operation

The on-screen menu provides the viewer with easy
access to adjustments and settings.
MAIN MENU
SOUND
PICTURE
SETTING
PRESET
During the menu operation, the following
buttons are used.
MENU
-/- -
To call up the menu.
To go back and to exit the menu.
CH
MENU
CH
,
To move around the menus.
To make adjustments.
Sound Adjustments
1
1
Press the MENU button to display main menu,
and "SOUND" will be selected first.
2
2
Press or
3
3
Select an item with
SOUND
VOLUME
BALANCE
EQUALIZER
AUTO VOLUME
SOUND PRESET
SURROUND
BASS EXPANDER
8
8
,
To move around the
menus.
to display "SOUND" menu.
or .
0
ON
PERSONAL
2
ON
4
4
Press or to adjust.
• BALANCE :
Left and Right speaker volume balance
adjustment.
• SOUND PRESET (Sound Mode Selection):
Enable to select the suitable sound adjustment
(PERSONAL, MUSIC, TALK, NORMAL). Also
possible to select directly
Mode button.
Note: Your sound adjustment will be memorized
to "PERSONAL"
automatically.
• SURROUND :
Enable to select active 3D surround modes
(SURROUND OFF, 1 or 2 ). Also possible to
select directly by pressing the SURROUND
button of the remote control.
• AUTO VOLUME (ON/OFF) :
This function automatically equates the sound
volume of each position. It is used to prevent the
sharp volume change when you change the
channel.
5
5
Press the MENU button repeatedly to exit.
Equalizer Adjustment
There are 5 types EQUALIZER adjustment:
• 100 Hz Adjustment
Adjustable from -32 == 0 == 31
• 300 Hz Adjustment
Adjustable from -32 == 0 == 31
• 1 KHz Adjustment
Adjustable from -32 == 0 == 31
• 3 KHz Adjustment
Adjustable from -32 == 0 == 31
• 8 KHz Adjustment
Adjustable from -32 == 0 == 31
Follow the steps below to adjust EQUALIZER.
1
1
Press the MENU button to display main menu,
and "SOUND" will be selected first.
2
2
Press or to display "SOUND" menu.
3
3
Select EQUALIZER with
4
4
Press or to display "EQUALIZER".
with the Sound
of the Sound preset
or .