Sanyo CE28DFN2-B Instruction Manual page 8

Parental lock
How to watch a locked channel.
1. Select a locked channel, Parental lock display appears.
Parental lock
!
1 BBC ONE
2. Press OK button, enter the Parental code and press OK again.
?
Enter parental code
OK Save
3. The channel is temporarily unlocked until the channel is changed.
4. Press MENU button to return to normal TV picture.
If Parental lock is activated and you wish to record this locked
channel, deactivate first before setting timer recording.
To deactivate parental lock.
1. Press the MENU button to select Main menu.
2. Enter the Parental code.
3. Press OK to enter menu functions.
4. Use the e e or d d buttons to select Parental unlock, press 8 8 to
enter.
5. Press Red button to deactivate.
!
Deactivate parental lock
OK Select RET Cancel
6. Press the MENU button to exit.
Main menu screen will show either Parental Lock or Parental
Unlock ( if it is use).
Once you have activated Parental Lock each time you need to
enter the Main Menu you will need the code.
Configuration
Preferred language.
1. Press MENU to select Main Menu.
2. Select Configuration by using e e or d d buttons. Press 8 8 to enter.
3. Press d d button to highlight Preferred language and press 8 8 to
enter.
Configuration
Prefered language
Change parental code
Common Interface
Audio - Select your preferences as required.
Example. If you speak Welsh (Gaelic) and prefer to receive Welsh
(Gaelic) audio when it is transmitted then select Welsh (Gaelic) for
your first Language and English as your second.
4. Press 7 7 or 8 8 to select Language, press e e or d d buttons select
second language and change your preference using 7 7 or 8 8
buttons.
8
DIGIT
DIGIT
All Channels
RET Cancel
AL OPERA TION
AL OPERA TION
Subtitling - Select your preferences as required.
If you wish for Welsh or Gaelic Subtitles instead of English to be
shown (when available) then select your preference for the first
language.
Example: as shown will give you English first language, if not
available Welsh may be shown.
5. To change press e e or d d buttons to highlight the box and press 7 7
or 8 8 to select your preferred First language and repeat for
Second language.
6. Press d d button to select Subtitle display. This can be set ON or
OFF by pressing 7 7 or 8 8 buttons.
7. Press OK to Save.
This takes you back to Configuration menu screen.
Change Parental Code - See page 7 under Parental lock.
Press MENU to return to normal TV Picture.
Common Interface
This TV set provides a common Interface slot on the rear of the TV
set.
AV2
1. Press MENU to select Main Menu.
2. Select Configuration by using e e or d d buttons. Press 8 8 to enter.
3. Press d d button to highlight Common Interface and press 8 8 to
enter.
The following screen appears to show that a card is inserted.
Reader 1: Interface card
OK Select
When you select OK, follow the on screen directions. This will vary
depending on the type of card inserted.
Important!
The TV should be turned off by the Mains Power switch when insert-
ing or removing the Common Interface Card, otherwise it may cause
damage to the card or the TV set.
Language choice
Audio:
First language English
Second language
Welsh
Subtitling:
First language English
Second language
Welsh
Subtitle display
English
OK Save RET Cancel
AV1
CI
ANT.75‰
Card
Common Interface
RET Cancel