Table of Contents
Advertisement
Channel List
Edit channel list
1. Press Menu button to select Main Menu.
2. Select Channel List by using e e or d d buttons. Press 8 8 to
enter.
Channel list
Lock channels
Scan for channels
3. Select Lock channels by using e e or d d buttons. Press 8 8 to
enter.
Lock channels
BBC ONE
Y
Parental lock
4. To delete channels from this list use e e or d d buttons to highlight
a channel.
6. To lock or unlock parental locked channels, select the channel and
press the yellow button. This will lock or unlock the channel.
7. Press the OK button, selected channels will be locked / unlocked
and parental lock/unlock stored.
You will go back to Channel List menu.
Scan for channels
1. Press Menu button to select Main Menu.
2. Select Channel List by using e e or d d buttons. Press 8 8 to
enter.
3. Press d d to select Scan for channels. Press 8 8 to enter.
Scan for channels
Channels found
The scan will take approximately 3 minutes
RET Stop
In progress
This will scan all available channels. This is a useful function if you
delete channels and want to get them back later.
4. Press OK to save (All Channels).
5. Press OK again to watch normal TV picture.
Parental lock is still saved after the scan for channels has been
initialised.
DIGIT
AL
DIGIT
AL
All channels
1
BBC ONE
2
BBC TWO
3
ITV 1
4
Channel 4
5
five
6
ITV 2
7
BBC THREE
8
Teletext
9
BBC FOUR
10
Sky Travel
11
UK History
12
Ch 14
13
CH 15
14
QVC
15
TV Travel Shop
OK Save
0
OPERA
TION
OPERA
TION
Technical Information
In this section a lot of the information will only be useful to a techni-
cian. Some parts are however useful to you. If there is an upgrade in
software you will need this section to upgrade your TV from time to
time.
1. Press Menu button to select Main Menu.
2. Select Technical Information menu by using e e or d d buttons.
Press 8 8 to enter.
Technical information
Signal information
Software upgrade
Product data
Reset
3. Select Signal information by using e e or d d buttons and press
8 8 to enter.
BBC THREE (BBC)
Free
DVB Identifiers (9018,4103,4351)
Channel 63
Signal strength (%) 34
Bit error rate
Uncorrected errors/sec
OK Select
This screen cannot be altered but if you have a problem you may
need to refer to this screen for some data.
4. Press Return or OK button to go back to Technical information
screen.
Software upgrade
1. Press d d button to select Software Upgrade screen. Press 8 8 to
enter.
Looking for new version.......
RET Cancel
This looks for any new software upgrades that maybe transmitted at
any time.
2. Press Return button to go back to Technical information screen.
3. Select Product Data by using e e or d d buttons and press 8 8 to
enter.
Product
Software
Resourse
Boot
RET Cancel
This is useful to service engineers.
4. Press Return button to go back to Technical information screen.
5. Press d d button to select Reset screen. Press 8 8 to enter.
!
Reset receiver configuration?
RET Cancel
If you press Red button to confirm it will return all settings to factory
(default) mode for digital channels. To start a scan for all available
channels switch the TV set Off and On again and press D/A button
to select digital.
When the TV set has been initialised press OK to Save and OK to
watch TV picture.
Signal information
RET Cancel
Software upgrade
Product data
LDITPGFTG_01_00
1.9.76 build jun 25 2003 16:10:15
1.26.3
2.4.0
R
Confirm
9
Advertisement
Table of Contents
