Wideshot qsr system
wide angle hd point of view camera system with a 82.2 horizontal
field of view manual lens and the quick-connect sr interface (20 pages)
Pre-Installation Functional Check Basic Connections RoboSHOT IW OneLINK Bridge System RoboSHOT IW OneLINK HDMI System RoboSHOT IW with Third-Party Connectivity Solution Installing the Camera Enclosure Before You Start Installing the Camera Enclosure in an Unfinished Wall Installing the Camera Enclosure in a Finished Wall...
Tips for a successful installation Information on mounting and connecting the camera Camera power-on Complete product information is available in the Integrator's Complete Guide to the RoboSHOT IW Architectural PTZ Conferencing Camera. Download manuals, dimensional drawings, and other information from www.vaddio.com/support.
RoboSHOT IW with Smart Glass 999-9965-100 – RoboSHOT IW with Smart Glass, Black, North America 999-9965-150 – RoboSHOT IW with Smart Glass, Primer Coated, North America 999-9965-101 – RoboSHOT IW with Smart Glass, Black, Europe/UK 999-9965-151 – RoboSHOT IW with Smart Glass, Primer Coated, Europe/UK RoboSHOT IW with Clear Glass 999-9966-100 –...
RoboSHOT IW OneLINK HDMI System with Smart Glass 999-9965-200 – RoboSHOT IW OneLINK HDMI System with Smart Glass, Black, North America 999-9965-250 – RoboSHOT IW OneLINK HDMI System with Smart Glass, Primer Coated, North America 999-9965-201 – RoboSHOT IW OneLINK HDMI System with Smart Glass, Black, Europe/UK 999-9965-251 –...
RoboSHOT IW OneLINK Bridge System with Smart Glass 999-9965-300 – RoboSHOT IW OneLINK Bridge System with Smart Glass, Black, North America 999-9965-350 – RoboSHOT IW OneLINK Bridge System with Smart Glass, Primer Coated, North America 999-9965-301 – RoboSHOT IW OneLINK Bridge System with Smart Glass, Black, Europe/UK 999-9965-351 –...
Installation Guide for the RoboSHOT IW Architectural PTZ Conferencing Camera A Quick Look at the Camera and Enclosure Camera and Lens – The 10x optical zoom lens and Exmor® 1/2.8 type, high-speed, low-noise image sensor deliver crisp full-HD video. Frame – Metal frame and glass window.
Installation Guide for the RoboSHOT IW Architectural PTZ Conferencing Camera Installing the Camera This section covers: Selecting the location for the camera Installing the enclosure Connecting the camera Completing the installation Don’t Void Your Warranty! Caution This product is for indoor use. Do not install it outdoors or in a humid environment without the appropriate protective enclosure.
Installation Guide for the RoboSHOT IW Architectural PTZ Conferencing Camera Selecting the Installation Area Install the camera in a location that meets the following requirements. Note Work must conform to local building codes and should be performed by qualified personnel.
Installation Guide for the RoboSHOT IW Architectural PTZ Conferencing Camera Installing the Power Source You can connect the camera to the IP network using a mid-span power injector, or you can connect it to a OneLINK device. If you use a OneLINK device, it may be installed up to 328 ft (100 m) from the camera.
Installation Guide for the RoboSHOT IW Architectural PTZ Conferencing Camera Installing the Camera Enclosure The RoboSHOT IW camera may be installed either in an unfinished wall, before the drywall is in place, or in a finished wall. In either situation, the installation is in three steps: Install the enclosure using the appropriate procedure.
Installation Guide for the RoboSHOT IW Architectural PTZ Conferencing Camera Installing the Camera Enclosure in a Finished Wall Follow these steps if the drywall is in place. Warning Before cutting the opening for the camera enclosure, ensure that no wiring is present in or immediately adjacent to the area that the camera enclosure will be set into.
Installation Guide for the RoboSHOT IW Architectural PTZ Conferencing Camera Installing the Camera Do this only after verifying that the camera powers up properly. See Pre-Installation Functional Check details. 1. Place the camera assembly in the enclosure, with the face in front of the tabs. If the enclosure has a smart glass cover, ensure that the cable for the cover panel is accessible.
The camera is now ready to configure and use. This information is available in the Configuration and Administration Guide for the RoboSHOT IW Architectural PTZ Conferencing Camera. It is also included in the Integrator's Complete Guide to the RoboSHOT IW Architectural PTZ Conferencing...
Vaddio receives notice of such defects during the warranty. Vaddio, at its option, will repair or replace products that prove to be defective. Vaddio manufactures its hardware products from parts and components that are new or...
Installation Guide for the RoboSHOT IW Architectural PTZ Conferencing Camera Compliance Statements and Declarations of Conformity Compliance testing was performed to the following regulations: FCC Part 15 (15.107, 15.109), Subpart B Class A ICES-003, Issue 54: 2012 Class A EMC Directive 2014/30/EU...
Installation Guide for the RoboSHOT IW Architectural PTZ Conferencing Camera European Compliance This product has been evaluated for Electromagnetic Compatibility under the EMC Directive for Emissions and Immunity and meets the requirements for a Class A digital device. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. ...
structural requirements 7 Index typical installation 8-9 anatomy of the camera 5 visual packing list 2-4 behavior on power-up 13 warranty 6, 14 cable connector 6 camera power 8 capabilities 1 colors of the status light 5 connection example 8-9 damage, preventing 6 indicator light 5 installation requirements 10...
Page 20
Vaddio, RoboSHOT, and OneLINK are trademarks or registered trademarks of Milestone AV Technologies. HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance. Exmor® is a trademark of Sony Corporation. All other brand names or marks are used for identification purposes and are trademarks of their respective owners.