Secure the ATF cooler with the three 6 x 20 mm
washer bolts to the front bulk head and the center
mount support bracket.
Install the ATF pipe assembly bracket to the
vehicle's frame with the 6 x 12 mm flange bolt.
Connect to ATF
© 2015 American Honda Motor Co., Inc. – All Rights Reserved.
Remove the ATF filter hose and discard it. Then
connect the upper ATF assembly hose to the ATF
pipe, and the lower ATF assembly hose to the ATF
filter as shown.
Connect to transmission.
Install all removed parts.
10. Inspect the ATF fluid and adjust as required.
11. Install the hang-tag around the rear view mirror.
Do not reuse.
3 of 3