Advertisement
2.
Remove the splash shield, and fold down the front
bumper skid trim lower flap.
FRONT BUMPER
SKID TRIM
Fold down
the lower
flap.
3.
Remove the lower air guide.
FRONT OF VEHICLE
REAR OF VEHICLE
LOWER AIR
GUIDE
2 of 3
SPLASH SHIELD
Remove.
BOLTS (4) CLIPS (4)
4.
Remove the front bumper center lower grille
NOTE: If equipped, remove the parking sensor sub
harness clamps.
LONG SCREW (2)
5.
Slide the ATF cooler assembly up in front of the
radiator as shown.
AII01913-51 (1507)
WIRING HARNESS
CLIPS (16)
GRILLE
CLIP
SCREWDRIVER
ATF COOLER ASSEMBLY
© 2015 American Honda Motor Co., Inc. – All Rights Reserved.
Advertisement
