Using The Led Spotlight - Snap-On ELITE User Manual

Operation

4.4.8 Using the LED Spotlight

An LED spotlight is provided to illuminate areas of low light when capturing visual images and
video. Press the Y button (in LIve mode) to turn the LED spotlight ON/OFF.
Button
The spotlight has three intensity levels, to change the light level, see
page 27.
NOTE:
i
When the battery reaches a low charge level (approximately one bar indication on icon), the LED
flashlight is disabled. The spotlight will be functional again when the battery has been charged to
approximately 30%. Always turn the spotlight off before and when charging the battery.
NOTE:
i
A fully charged battery pack can provide up to 4 hours of continuous operation. The battery
discharge rate will vary depending on overall use and settings. To optimize battery life when using
the spotlight, use the spotlight at brief intervals with a lower intensity level.
LED Spotlight - On / Off
Live Mode Special Button Operation
17
Basic Operation (Live Mode)
Spotlight Intensity on