Advertisement
4.4 ALARMS - Alarms
ALARMS - By pressing the 'D' (Down) button, we can scroll through the available alarms offered
by the MAXBEC2D.
Voltage Alarm A - Set the voltage at which point the alarm specified by the Beep Volt. Alarm
setting, will be sounded by the transmitter module for battery A. (See '4.3 SETTING -
Configuration Options')
Voltage Alarm B - Set the voltage at which point the alarm specified by the Beep Volt. Alarm
setting, will be sounded by the transmitter module for battery B. (See '4.3 SETTING -
Configuration Options')
Temp. Alarm - Set the temperature at which point the alarm specified by the Beep Temp. Alarm
setting, will be sounded by the transmitter module. (See '4.3 SETTING - Configuration Options')
5. Output Voltage Adjustment
The output voltage of the MAXBEC2D can be adjusted in two ways:-
•
Using the short-circuit (or 'jumper') plug directly on the unit, the output voltage can be
adjusted from 5.0, 5.4, 5.7 to 6.0 volts. For this approach, the BEC must be configured
appropriately (See section 4.3 and refer to the Output (x.x) Volt configuration option)
Advertisement
Need help?
Do you have a question about the Max BEC 2D and is the answer not in the manual?
Questions and answers