Wet Bulb Temperature - Extech Instruments SDL550 User Manual

Moisture content meter plus dew point, wet bulb, and thermocouple temperature functions
Table of Contents

Advertisement

Dew Point Temperature
Note: The Dew Point display value is calculated from the humidity and temperature measurements made by the moisture probe

Wet Bulb Temperature

Note: The Wet Bulb display value is calculated from the humidity and temperature measurements made by the moisture probe; The Wet Bulb accuracy is the sum
of the humidity and temperature measurement accuracies
Thermocouple Temperature
Sensor Type
Type K
Type J
• The temperature range of the meter extends up to 1300°C (2372°F), however thermocouple sensor ranges vary greatly; be sure to select a
thermocouple rated for the expected temperature measurement ranges.
• Accuracy specified for meter only. Thermocouple probes add additional measurement error.
• The above specifications are tested under an environmental RF Field Strength lower than 3 V/M and a frequency lower than 30 MHz
Copyright © 2011 Extech Instruments Corporation (a FLIR company)
All rights reserved including the right of reproduction in whole or in part in any form
°C
Range
Resolution
°F
Range
Resolution
°C
Range
Resolution
°F
Range
Resolution
Resolution
0.1°C
0.1°F
0.1°C
0.1°F
-25.3 to 48.9°C
0.1°C
-13.5 to 120.1°F
0.1°F
-21.6 to 50.0°C
0.1°C
-6.9 to 122.0°F
0.1°F
Range
-50.0 to 1300.0°C
-100.0 to -50.1°C
-58.0 to 2372.0°F
-148.0 to -58.1°F
-50.0 to 1200.0°C
-100.0 to-50.1°C
-58.0 to 2192.0°F
-148.0 to -58.1°F
www.extech.com
12
Accuracy
±(0.4 % + 0.5°C)
±(0.4 % + 1.0°C)
±(0.4 % + 1.0°F)
±(0.4 % + 1.8°F)
±(0. 4 % + 0. 5°C)
±(0.4 % + 1.0°C)
±(0.4 % + 1.0°F)
±(0. 4 % + 1. 8°F)
SDL550-EU-EN-V1.2-10/11

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SDL550 and is the answer not in the manual?

Table of Contents