Date And Time Setting - Sanyo Xacti VPC-CG20 Manual For Basic Operation

DATE AND TIME SETTING

The camera will record the date and time an image or audio recording is
taken so that you can display them during playback. Therefore, before
capturing images, make sure the correct date and time are set.
h To correct the date and time setting, please see under HINT on page 22.
Example: To set the clock to 7:30 p.m. on December 24, 2010
1
Turn on the camera (page 17),
and press the SET button.
h The Clock Set Screen appears.
h Follow the procedures below to
enable or disable the date
display during playback, to set
the display format for the date,
and to set the date and time.
h To display the Recording or
Playback Screen, press the
MENU button 2 times.
2
Set the date.
1 Select "DATE".
2 Press the SET button.
h The Set Date Screen
appears.
3 Set the date to "2010/12/24".
h The date is set in the
following order: Set the year
→ Set the month → Set the
day.
h Toggle the SET button left or
right to select year, month or
day. Toggle the SET button up
or down to increase or
decrease the number.
4 Press the SET button.
CLOCK SET
DATE 2010/02/01
TIME 00:00
DISP D / M / Y
OK
CLOCK SET
DATE 2010/12/24
OK
English
20