Date And Time Setting - Sanyo Xacti VPC-HD2000 Instruction Manual

DATE AND TIME SETTING
The camera will record the date and time an image or audio recording is
taken so that you can display them during playback. Therefore, before
capturing images, make sure the correct date and time are set.
• To correct the date and time setting, please see under HINT on page 45.
Example: To set the clock to 7:30 p.m. on December 24, 2009
Turn on the camera (page 40),
and press the SET button.
• The Clock Set Screen appears.
• Follow the procedures below to _ _
enable or disable the date _ 1_
display during playback, to set
_
the display format for the date,
and to set the date and time. I_:_
• To display the Recording or
Playback Screen, press the
MENU button 2 times.
2
Set the date.
Q Select "DATE".
@ Press the SET button.
• The Set Date Screen
appears.
_) Set the date to "2009/12/24".
• The date is set in the
following order: Set the year
Set the month _ Set the
day.
• Toggle the SET button left or
right to select year, month or
day. Toggle the SET button up
or down to increase or
decrease the number.
G) Press the SET button.
43 English