Sanyo Xacti VPC-CG20 Manual For Basic Operation page 22

CAUTION
Do not attempt to forcibly remove the card
i Doing so may damage the card or the stored files.
If the multi-indicator is flashing red...
i Never remove the card when the multi-indicator is flashing red, as doing so
may result in loss of files stored in the card.
HINT
To format a card
1 Insert the card in the camera, and press the ON/OFF button (pages 12
and 17).
2 Set the camera to the NORMAL mode (page 24).
3 Press the MENU button.
4 Select the [E] tab, and press the SET button.
5 Select "FORMAT" and press the SET button.
i The Format Screen appears. Follow the instructions on the screen to
format the card.
Shooting without a card installed
i When a card is installed, images are recorded to and played back from the
card. When no card is installed, images are recorded to and played back
from the camera's internal memory. When the camera is turned on with no
card installed, the internal memory icon
you know that the images you capture will be saved to the camera's
internal memory.
13
English
is shown on the monitor to let