Installing The Card - Sanyo Xacti VPC-CG20 Manual For Basic Operation

INSTALLING THE CARD

Be sure to format a newly purchased card or one that was used in another
device before using it in your camera (page 13). If an unformatted card is
used, the card itself may become unusable.
Card slot cover
4 Close
1 Raise up
2 Swivel
3 Insert the card
<When removing the card...>
h To remove the card, press it in, and then release. The card will
protrude slightly, and you can then pull it out.
2 Pull it out
1 Push the card in
12
English