Copy Data From Your Camera To The Computer - Sanyo DUAL CAMERA VPC-PD1EX Instruction Manual

Copy data from your camera to the computer

Connect your camera to a computer, and copy the desired data to the
computer.
1
Turn on the computer, and use the supplied dedicated USB interface
cable to connect your camera to the computer.
h Connect the cable between the camera's USB terminal and the
computer's USB connector.
To USB terminal
Supplied dedicated USB interface cable
To USB connector on the computer
<Insert and pull out the cable and USB plug carefully>
i When connecting the cables, make sure that the plugs are correctly
oriented and that they match the shapes of the terminal sockets on the
devices. Push the plugs in straight when connecting them. If undue force is
used to connect a cable, it may permanently damage the terminal or the
camera.
i If excessive force is used to pull the USB plug, it may damage the cable
and/or connector.
Push
Camera on/off switch
• OFF
Computer power switch
• ON
English
x