Sanyo DS35510 Owner's Manual page 6

MULTIMEDIA REMOTE CONTROL KEYS
Point towards TV
VCR TV
AUX
RACKING
Mode Keys—Use these keys to program the remote
control and to select the operating mode (VCR, TV,
DVD, or AUX ).
Input / TV•VCR Key—In the TV, DVD, Cable, and
Satellite modes, this key selects the program source to
display on the screen (TV signal or signal from equip-
ment connected to the A / V jacks). In the VCR mode,
this key functions as a VCR's TV/VCR key.
Number Keys—Two keys must be pressed to select a
channel. Example: Press 0 then 6 to select channel 6.
For cable channels 100 through 125, press and hold
the 1 key until C1–– appears. Then press the other
two numbers.
Caption Key—(See page 16.)
6
DVD
11
12
13
14
15
16
V-Guide Key —(See pages 14 and 15.)
Menu / Guide Key—Use this key with the
and / keys to navigate and adjust features of the
on-screen menu system (see pages 10 ~ 12). Use it to
display the Satellite Guide in the Satellite mode.
Channel (CH) Scanning (
Volume ( / ) Keys—Press to scan through the
channels in memory and to adjust the volume.
Mute Key—Press once to turn off the volume. Press
again to restore.
Note: When using the audio out jacks this key will not
mute the sound in the fixed mode, but will mute the
sound in the variable mode.
VCR/DVD Keys—These keys control DVD and/or
VCR functions for Fast Forward (
Play ( ), Record (Rec), Stop ( ), Tracking (– / +),
and Pause functions.
Reset Key—Press this key twice to restore factory
settings. The TV will automatically start Channel
Search and clear all customized settings. (See page 17.)
11
Power Key—Press to turn TV on or off.
12
Sleep Key—Use this key with the "0" key to set the
Sleep Timer (see page 17).
13
Enter Key—Satellite operation only.
14
Recall Key—Select a channel then select another
channel using the number keys. Press Recall to switch
between the channels.
15
Display Key—Press once to display the channel
number and time. Press twice to display the channel
number continuously. Press again to remove the
display.
16
Light Key—Press to backlight the keypad. Keys will
remain lit for a few seconds after releasing the key.
/
/ ) and
), Rewind ( ),