Trackmaps And Lap-Timing; Usb Pc Connection; Sd Cards; Usb Memory Sticks - Racelogic Video VBOX Quick Start Manual

Trackmaps and Lap-timing

To have lap-timing information or a circuit map shown on the video, the default internal 'Scene' needs to be modified. To
do this, you need to use Video VBOX Setup software, see here for more details.

USB PC connection

USB driver installation program can be downloaded from here.
Always use the Supplied USB Cable
When connecting the Video VBOX to your computer, make sure you are using the USB cable supplied.
Some 'standard' USB leads do not have a full length USB connector and will disable communication between your PC
and the Video VBOX LITE.
Mobile Phone Software
Ensure that you shut down any mobile phone software running on your computer before connecting. We are aware of
conflicts which can arise when using this kind of software.

SD cards

When purchasing SD cards, always buy a quality brand such as SanDisk, Kingston or Lexar.
Format : FAT32

USB memory sticks

If data is to be logged to a USB memory device, the optional RLCAB073 cable is required. Racelogic recommend good
quality USB sticks - write speeds above 7MB/s and good USB chip sets are essential.

Software Installation

To install the software insert the CD into the CD drive of your computer.
4