Security Tab
Administrator Password
User Password
HDD Security configuration
HDD <port # & mfg name>
*HDD information
*Set User Password
*Set Master Password
Save & Exit Tab
Save Changes and Exit
Discard Changes and Exit
Save Change and Reset
Discard Changes and Reset
Restore Defaults
Save as User Defaults
Restore User Defaults
Boot Override
Launch EFI from file/system device
Keys' function
Up/Down arrows (↑/↓)
Left/Right arrows (←/→)
Enter
system boots from the selected path then reverts back to the
default behavior for subsequent boots after USB or PXE is removed.
Limits access to changing the BIOS setup. It is only asked when attempting
to enter BIOS setup if User Password is not assigned. The default
Password is U$3th3forc3.
Set User password to access BIOS. No default password is assigned.
Display header.
The port # and manufacturer name appear for a functional drive(s). If
device(s) supports security, selecting item presents new screen for the
following options for each drive.
Display the types of security supported and status of each.
Set User password to access drive. No default password is assigned.
Set Master password to enable drive security. No default password is
assigned.
When you have completed the system configuration changes, select this
option to leave BIOS setup environment and the new system configuration
parameters can take effect.
Leave BIOS setup environment without saving any changes.
Leaves the BIOS setup environment with saving any changes and reboots
the computer so the new system configuration parameters can take effect.
Reboot the computer without saving any changes
Load default value for all setup options.
Save the changes done so far as user default.
Restore the user default to all the setup options.
Immediately following this header is a list of bootable devices. Upon
selecting a device that is not the default Boot device, the BIOS will restart
and boot from that selection once. Then, any subsequent soft or hard
boots will be with the default device.
Attempts to launch EFI shell application from one of the available file
system devices.
Select item
Select screen
Select
31