Table of Contents
Advertisement
VESA Mounting: 100x100mm
Warning
: Use suitable mounting apparatus to avoid risk of injury
Cleaning/Disinfecting
During normal use of the DMS-SA13 may become soiled and should, therefore, be cleaned
regularly. Agents: Green tinctured soap and Enzymatic detergents
Steps:
1. Wipe the DMS-SA13 with a clean cloth that has been moistened in the cleaning solution.
2. Prepare agent per manufacturer's instructions.
3. Wipe thoroughly with a clean cloth
Cautions
Do not immerse or rinse the DMS-SA13 and its peripherals. If you accidentally spill liquid on
the device, disconnect the unit from the power source. Contact your Biomed regarding the
continued safety of the unit before placing it back in operation.
Do not spray cleaning agent on the chassis. Do not use disinfectants that contain phenol. Do
not autoclave or clean the DMS-SA13 or its peripherals with strong aromatic, chlorinated,
ketone, ether, or Esther solvents, sharp tools or abrasives. Never immerse electrical
connectors in water or other liquids.
11
Advertisement
Table of Contents
