Section 8: Removing & Installing Screen And Window; Removing The Screen; Removing The Window; Reinstalling The Door - Montigo R Series Installation & Maintenance Manual

Ndoor gas fireplace natural gas or propane gas
Table of Contents

Advertisement

Section 8: Removing & Installing Screen and Window
Removing the Screen
Follow the steps below to remove, or install the fireplace screen and door.
Before beginning any screen or glass removal, make sure that the unit has
not been in operation and that it is at room temperature.
Step 1: Prepare to Lift out Screen Assembly
Grip either end of the screen assembly and pull towards yourself. The
screen assembly is held to the unit by both friction and magnets.
Step 2: Lift out the Retaining Tabs and screen.
The Retaining Tabs are quite long and in most cases, this task would be
better performed by two people.
Once the Retaining Tabs have come away from the Fireplace, lift the screen
away and store in a safe place. The Screen is very fragile and can be easily
torn, dented or deformed. Refer to Figure 11 below.
Window Screen
Window screen
Assembly
assembly
Ventilation slots
Ventilation slots
located at the bottom
located at the bottom
of the Screen Assembly
of the Screen Assembly
Figure 11. Screen Removal.
NOTICE
Any safety screen, guard, or barrier removed for servicing an
appliance, must be replaced prior to operating the appliance
Glass Lifting
Tools
Glass Panel
24
Retaining
Retaining
Tabs (2x)
Tabs (2x)
Removing the Window
Follow the steps to remove, or install the fireplace window
Step 1: Use Glass Lifting Tools to Remove Window
Use the Glass Lifting Tools that are included with your fireplace. Attach
one to each end of the window pane. Make certain that they are firmly
attached and secure.
Figure 11.b Glass lifting tool
Step 2: Lift out Window from Grooves
The window is removed by first lifting upward on the glass and then by pulling
the bottom out from the groove in which it was located (see image below).
Once the bottom of the window is clear of the fireplace, lower the window
down from the upper groove in which it was located. Lift the window clear
of the fireplace and store it in a safe place.
Window Screen
Assembly
Ventilation slots
located at the bottom
of the Screen Assembly
Figure 11.c Window Removal (using glass lifting tools).

Reinstalling the door

Follow the four previous steps to re-install the R-Series fireplace window.
Glass Lifting
Glass
Tools
Lifting Tools
Glass Panel
Glass Panel
Installation
Retaining
Tabs (2x)

XG0225 - 170223

Advertisement

Table of Contents
loading

Table of Contents