Table of Contents
Advertisement
STEP 8: Log #3 is placed just in front of the burner in the middle of
the tray.
STEP 9: Log #5 rests across logs #3 and #2, crossing over the
burner.
STEP 10: Log #4 leans on the top of log A, with the other end resting
on the other side of the burner
4
Note: It is normal to see some soot build-up on logs that cross the flame. Soot should not build up enough to form balls.
XG0225 - 170223
2
3
Figure 12.j
5
Figure 12.k
Figure 12.l
Adjust logs away from flame as necessary if this occurs.
STEP 11: #6 rests against log #4 in front of the burner
4
STEP 12: The second log #5 rests on log B and crosses over the
burner.
STEP 13: The second log #1 is placed parallel to the burner and in
front of log B.
Figure 12.p
Installation
6
Figure 12.m
5
Figure 12.n
1
Figure 12.o
27
Advertisement
Table of Contents
