HEADSET JACK AND BELT CLIP
Headset connection (Headset not included)
For hands free conversation, connect the
headset (not included) to the HEADSET jack.
The handset earpiece and microphone are
disabled when the headset is connected.
Press TALK/CALL BACK to answer or place a
call while using the headset.
Belt clip installation
Attach the belt clip by inserting the sides of
•
the belt clip into the slots.
Snap the ends of the belt clip into place.
•
LIGHT SIGNALS
The charge/in use & incoming call/in use indicator will change under the
following conditions.
CHARGE/IN USE LED on the base
Talking
Charging
Incoming call
Paging
Voice mail
INCOMING CALL/IN USE LED on the handset
Talking
Paging
Low battery
Incoming call
Lit steadily
Lit steadily
Flashes in same pattern as telephone ring
Flashes every 0.5 second
Flashes every 1 second
Lit steadily
Flashes every 1 second
Flashes every 15 seconds
Flashes in same pattern as telephone ring
25
Belt clip
slot