INITIAL PROGRAMMING
8. Press FLASH/PROG again to store the selection. You will hear a
confirmation tone.
Idle animation
This feature allows animation to display when the handset is on the base
cradle:
1. Make sure the phone is off (not in TALK mode).
2. Press FLASH/PROG repeatedly until the following information
displays:
3. Press CID/VOL
animation on or off.
4. Press FLASH/PROG again to store the selection. You will hear a
confirmation tone.
Resetting to default
You can reset the phone programming to the initial factory default
settings. The default settings are:
Language
Area Code
Contrast
Ringer Tone
Tone/Pulse Setting
DND
Idle Animation
1. Make sure the phone is OFF (not in TALK mode).
2. Press FLASH/PROG repeatedly until "DEFAULT
screen.
3. Press CID
or
4. Press FLASH/PROG again to confirm. You will hear a confirmation
tone.
or
, or the number keys (1-2) to turn the
English
- - -
3
1
Tone
Disabled
Enabled
, or the 1 or 2 keys to select your choice.
12
1 NO" shows on